Italian Charm bracelets are modular bracelets, each link can be taken out and replaced with a different one! Each link is spring-loaded and can be removed without the help of any special tools. You begin with a starter bracelet which can contain anything from 14-19 links. The most common starter bracelets are 9mm are made of stainless steel and have either a shiny or matt finish.
From then on its up to you! Add or replace the links in your starter bracelet with letters, pictures or birthstones – the list is endless! Create a piece of jewellery that is as individual as you are! They also make great presents as they can be entirely customized to suit the individual. All our charms are entirely interchangeable with other major brands – including Nomination Italy
How many Links do I Need?
Determine whether you want the bracelet to fit snuggly or move around, bearing in mind the links are spring-loaded and will expand to fit. The following information is meant as a guide:-
- 15 links = 5 and 2/3 inches
- 16 links = 6 and 1/3 inches
- 17 links = 6 and 2/3 inches
- 18 links = 7 and 1/3 inches
- 19 links = 7 and 2/3 inches
- 20 links = 8 and 1/3 inches
- 21 links = 8 and 2/3 inches
Charm Links Instructions for Starter Bracelets:
For the first timer the charm bracelet may be challenging to put together. It is a simple process and once you get the first charm on the bracelet, things will go quickly. The procedure for putting charms on is the same as the process for removing them. The photos below show a bracelet which already has charms on it and new charms being added, the concept is the same for starter bracelets.
The charms link together using a loop on the back of the starter bracelet which hooks up to the opening on the charm. Notice that in order to put the new charm on you must expand the starter link outward and press down with your thumb to keep it in place. If it is your first time you may find it easier to use a tool of some type, a nail file or strong object to hold open the link while putting on the charm, another set of hands is sometimes helpful as well.
The left side of the charm will have an opening to link to. The charms are tiny and the opening is small, look carefully, it is a slot only a few millimeters wide.
Holding the link open by using pressure from your thumb, slide the charm onto the end from the bottom up. Tilting it at an angle may help to align the links to make it easier to slide onto the starter.
Remove Charm Links Instructions
Step 1
Hold the bracelet securely: Using the left hand, hold the bracelet in the palm of your hand. Your index finger and thumb should be free.
Step 2
Secure the other side of the bracelet using your right hand, pull the bracelet outward to expand the links
Step 3
Both hands should be horizontal when pulling outward.
Step 4
Using your left hand press down into the charm area to keep bracelet expanded. If you are making a first time starter bracelet, you will need to use the last link on the right side of the bracelet as a starting point.
Step 5A
Notice that the back of each link has a loop on which to put the charms, and that you can hook them on or off at that area.
Now, using your right hand, slide the charm on the right side over also.
Step 5B
Different angle showing looped back and charm sliding over.
Step 6
Using your right hand, push the right link toward the bottom to remove it from the link. It will slide downward and then off the link.